CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

More documents

Recommendations

Info

Default Setting (System Menu) Switching Unit of Measurement Select inch or metric for the unit for paper dimensions. Use the procedure below to change the input units. 1 Press the System Menu key. 2 Press [Common Settings] and then [Change] of Measurement. 3 Select [mm] for metric or [inch] for inch. 4 Press [OK]. Error Handling Select whether to cancel or continue the job when error has occurred. The possible errors and what to do for the errors are as follows. Duplexing Error Select what to do when duplex printing is not possible for the selected paper size and media type. Item Description 1-sided Display Error Printed in 1-sided Error message to cancel printing is displayed. Finishing Error Select alternative actions when finishing (stapling or offsetting) is not available for the selected paper size or media type. Ignore Processing Display Error Description The setting is ignored and the job is printed. Error message to cancel printing is displayed. 8-16 OPERATION GUIDE
Default Setting (System Menu) No Staple Error Select what to do when staples run out during printing. Item Description Ignore Display Error Printing continues without stapling. Error message to cancel printing is displayed. NOTE: The messages are displayed when the optional document finisher or 3,000 sheet document finisher is installed. Stapling Limit Error Select what to do when stapling capacity is exceeded during printing. Ignore Item Display Error Description Printing continues without stapling. Error message to cancel printing is displayed 8 NOTE: The messages are displayed when the optional document finisher or 3,000 sheet document finisher is installed. Punch Waste Full Error Select what to do when the punch waste box becomes full during printing. Item Description Ignore Display Error Printing continues without punching. Error message to cancel printing is displayed. NOTE: The messages are displayed when the optional 3,000 sheet document finisher and punch unit are installed. OPERATION GUIDE 8-17
Page 1 and 2:
Instruction Handbook DCC 2725 | 273
Page 3 and 4:
Safety Conventions in This Guide Th
Page 5 and 6:
Contents 4 Copying Functions Origin
Page 7 and 8:
Contents 10 Troubleshooting Solving
Page 9 and 10:
To send documents It sends. Adminis
Page 11 and 12:
Caution / Warning Labels Caution /
Page 13 and 14:
Message: "Warning for high temperat
Page 15 and 16:
CAUTION Do not pull the power cord
Page 17 and 18:
Other precautions Return the exhaus
Page 19 and 20:
Safety Instructions Regarding the D
Page 21 and 22:
Legal and Safety Information Please
Page 23 and 24:
Regarding Trade Names • PRESCRIBE
Page 25 and 26:
Original SSLeay License Copyright (
Page 27 and 28:
Energy Saving Control Function The
Page 29 and 30:
Conventions in This Guide The follo
Page 31 and 32:
Originals and Paper Sizes This sect
Page 33 and 34:
1 Part Names This chapter identifie
Page 35 and 36:
Part Names Blinks while data is rec
Page 37 and 38:
Part Names 19 20 21 22 23 24 25 26
Page 39 and 40:
2 Preparation before Use This chapt
Page 41 and 42:
Preparation before Use Determining
Page 43 and 44:
Preparation before Use Connecting C
Page 45 and 46:
Preparation before Use Switching th
Page 47 and 48:
Preparation before Use Date/Timer -
Page 49 and 50:
Preparation before Use 9 Press [Off
Page 51 and 52:
Preparation before Use Embedded Web
Page 53 and 54:
Preparation before Use 2 Enter the
Page 55 and 56:
Preparation before Use Loading Pape
Page 57 and 58:
Preparation before Use IMPORTANT:
Page 59 and 60:
Preparation before Use 3 Adjust the
Page 61 and 62:
Preparation before Use 3 For landsc
Page 63 and 64:
Preparation before Use 1 Press the
Page 65 and 66:
Preparation before Use 1 Press the
Page 67 and 68:
Preparation before Use (Metric mode
Page 69 and 70:
Preparation before Use 2 Place the
Page 71 and 72:
3 Basic Operation This chapter expl
Page 73 and 74:
Basic Operation Power Off Before tu
Page 75 and 76:
Basic Operation Sleep and Auto Slee
Page 77 and 78:
Basic Operation Login/Logout If use
Page 79 and 80:
Basic Operation Enter key and Quick
Page 81 and 82:
Basic Operation Touch Panel Display
Page 83 and 84:
Basic Operation Adjusting Density U
Page 85 and 86:
Basic Operation Zoom Copying Adjust
Page 87 and 88:
Basic Operation Duplex Copying Prod
Page 89 and 90:
Basic Operation 5 If you choose [1-
Page 91 and 92:
Basic Operation Reserve Copy This f
Page 93 and 94:
Basic Operation Staple Use this fea
Page 95 and 96:
Basic Operation Punching Punch hole
Page 97 and 98:
Basic Operation Printing - Printing
Page 99 and 100:
Basic Operation Sending This machin
Page 101 and 102:
Basic Operation ABCD Ready to send.
Page 103 and 104:
Basic Operation For send to folder
Page 105 and 106:
Basic Operation Specifying Destinat
Page 107 and 108:
Basic Operation Choosing by One Tou
Page 109 and 110:
Basic Operation When additional cop
Page 111 and 112:
Basic Operation Custom Box List The
Page 113 and 114:
Basic Operation Viewing/Editing Box
Page 115 and 116:
Basic Operation Password Entry Requ
Page 117 and 118:
Basic Operation Quick Setup Screen
Page 119 and 120:
Basic Operation 4 Press [OK]. A con
Page 121 and 122:
Basic Operation Using the Browser S
Page 123 and 124:
4 Copying Functions This chapter ex
Page 125 and 126:
Copying Functions 3 Press [Org./Pap
Page 127 and 128:
Copying Functions Selecting the Mul
Page 129 and 130:
Copying Functions 8 Press [OK]. 9 P
Page 131 and 132:
Copying Functions Originals of Diff
Page 133 and 134:
Copying Functions Original Orientat
Page 135 and 136:
Copying Functions Output Destinatio
Page 137 and 138:
Copying Functions Single Color Copy
Page 139 and 140:
Copying Functions Hue Adjustment Ad
Page 141 and 142:
Copying Functions One-touch Image A
Page 143 and 144:
Copying Functions Background Densit
Page 145 and 146:
Copying Functions 4-in-1 Mode For c
Page 147 and 148:
Copying Functions Margin/Centering
Page 149 and 150:
Copying Functions Border Erase Use
Page 151 and 152:
Copying Functions Booklet from Shee
Page 153 and 154:
Copying Functions 7 Press [Original
Page 155 and 156:
Copying Functions Page Numbering Nu
Page 157 and 158:
Copying Functions Memo Mode Deliver
Page 159 and 160:
Copying Functions Poster For using
Page 161 and 162:
Copying Functions Image Repeat/Doub
Page 163 and 164:
Copying Functions Continuous Scan W
Page 165 and 166:
Copying Functions Auto Image Rotati
Page 167 and 168:
Copying Functions Mirror Image Copi
Page 169 and 170:
Copying Functions Job Finish Notice
Page 171 and 172:
Copying Functions Priority Override
Page 173 and 174:
Copying Functions Outputting Repeat
Page 175 and 176:
Copying Functions Ready to copy. Co
Page 177 and 178:
Copying Functions 3 Place the origi
Page 179 and 180:
Copying Functions Editing and Delet
Page 181 and 182:
5 Sending Functions This chapter ex
Page 183 and 184:
Sending Functions Ready to send. Pl
Page 185 and 186:
Page 187 and 188:
Sending Functions Centering When yo
Page 189 and 190:
Sending Functions When the original
Page 191 and 192:
Sending Functions 1-sided/2-sided S
Page 193 and 194:
Sending Functions Original Orientat
Page 195 and 196:
Page 197 and 198:
Sending Functions 7 Press [Confirma
Page 199 and 200:
Sending Functions Image Quality Sel
Page 201 and 202:
Sending Functions Scan Resolution S
Page 203 and 204:
Sending Functions Background Densit
Page 205 and 206:
Sending Functions Continuous Scan W
Page 207 and 208:
Sending Functions Border Erase to B
Page 209 and 210:
Sending Functions Enter E-mail Subj
Page 211 and 212:
Sending Functions Job Finish Notice
Page 213 and 214:
Sending Functions Send and Store Wh
Page 215 and 216:
Sending Functions Color Type This s
Page 217 and 218:
6 Document Box This chapter explain
Page 219 and 220: Document Box Item Usage Restriction
Page 221 and 222: Document Box Printing Documents The
Page 223 and 224: Document Box Joining Documents The
Page 225 and 226: Document Box Deleting Documents The
Page 227 and 228: Document Box Upon completion of pri
Page 229 and 230: Document Box Job Box. 5 Select the
Page 231 and 232: Document Box Job Box. 4 Select the
Page 233 and 234: Document Box Removable Memory. 5 Se
Page 235 and 236: 7 Status / Job Cancel This chapter
Page 237 and 238: Status / Job Cancel Details of the
Page 239 and 240: Status / Job Cancel Sending Jobs St
Page 241 and 242: Status / Job Cancel No. Display / K
Page 243 and 244: Status / Job Cancel Checking Job Hi
Page 245 and 246: Status / Job Cancel Sending the Job
Page 247 and 248: Status / Job Cancel Pause and Resum
Page 249 and 250: Status / Job Cancel Reordering Prin
Page 251 and 252: Status / Job Cancel Device/Communic
Page 253 and 254: Status / Job Cancel 3 When Device c
Page 255 and 256: 8 Default Setting (System Menu) Thi
Page 257 and 258: Default Setting (System Menu) Defau
Page 259 and 260: Default Setting (System Menu) Origi
Page 261 and 262: Default Setting (System Menu) Paper
Page 267 and 268: Default Setting (System Menu) Defau
Page 269: Default Setting (System Menu) Speci
Page 273 and 274: Default Setting (System Menu) Use t
Page 275 and 276: Default Setting (System Menu) Origi
Page 277 and 278: Default Setting (System Menu) Use t
Page 279 and 280: Default Setting (System Menu) File
Page 281 and 282: Default Setting (System Menu) Borde
Page 283 and 284: Default Setting (System Menu) EcoPr
Page 285 and 286: Default Setting (System Menu) Repea
Page 289 and 290: Default Setting (System Menu) Quick
Page 291 and 292: Default Setting (System Menu) Sendi
Page 293 and 294: Default Setting (System Menu) 1 Pre
Page 295 and 296: Default Setting (System Menu) Quick
Page 297 and 298: Default Setting (System Menu) Print
Page 299 and 300: Default Setting (System Menu) EcoPr
Page 301 and 302: Default Setting (System Menu) Orien
Page 305 and 306: Default Setting (System Menu) Netwo
Page 307 and 308: Default Setting (System Menu) Adjus
Page 309 and 310: Default Setting (System Menu) Adjus
Page 311 and 312: Default Setting (System Menu) Auto
Page 313 and 314: Default Setting (System Menu) 8 Rep
Page 315 and 316: Default Setting (System Menu) 8 OPE
Page 317 and 318: Default Setting (System Menu) Norma
Page 319 and 320: Default Setting (System Menu) Devel
Page 321 and 322:
Default Setting (System Menu) Date
Page 323 and 324:
Default Setting (System Menu) Auto
Page 325 and 326:
Default Setting (System Menu) Editi
Page 327 and 328:
Default Setting (System Menu) Item
Page 329 and 330:
Default Setting (System Menu) NOTE:
Page 331 and 332:
Default Setting (System Menu) Delet
Page 333 and 334:
Default Setting (System Menu) Edit
Page 335 and 336:
Default Setting (System Menu) NOTE:
Page 337 and 338:
Default Setting (System Menu) Appli
Page 339 and 340:
Default Setting (System Menu) Insta
Page 341 and 342:
Default Setting (System Menu) Syste
Page 343 and 344:
Default Setting (System Menu) Netwo
Page 345 and 346:
Default Setting (System Menu) RA (S
Page 347 and 348:
Default Setting (System Menu) FTP (
Page 349 and 350:
Default Setting (System Menu) Setti
Page 351 and 352:
Default Setting (System Menu) Netwo
Page 353 and 354:
Default Setting (System Menu) IPSec
Page 355 and 356:
Default Setting (System Menu) 3 Pre
Page 357 and 358:
Default Setting (System Menu) Use t
Page 359 and 360:
Default Setting (System Menu) Licen
Page 361 and 362:
9 Maintenance This chapter describe
Page 363 and 364:
Maintenance Slit Glass/Dual scannin
Page 365 and 366:
Maintenance 2 Remove cleaning brush
Page 367 and 368:
Maintenance 5 Put away the cleaning
Page 369 and 370:
Maintenance 4 Remove the old toner
Page 371 and 372:
Maintenance 3 Cap the old waste ton
Page 373 and 374:
10 Troubleshooting This chapter exp
Page 375 and 376:
Troubleshooting Symptom Checkpoints
Page 377 and 378:
Troubleshooting Symptom Checkpoints
Page 379 and 380:
Troubleshooting Error Message Check
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Troubleshooting Responding to an Er
Page 387 and 388:
Troubleshooting Paper Jam Location
Page 389 and 390:
Troubleshooting 2 Remove the jammed
Page 391 and 392:
Troubleshooting 2 If paper is jamme
Page 393 and 394:
Troubleshooting 10 Pull out paper f
Page 395 and 396:
Troubleshooting 3 Press the specifi
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
Troubleshooting 5 Press the indicat
Page 403 and 404:
11 Management This chapter explains
Page 405 and 406:
Management User Login/Job Accountin
Page 407 and 408:
Management Item Account Name E-mail
Page 409 and 410:
Management Changing User Properties
Page 411 and 412:
Management Unknown login user name
Page 413 and 414:
Management 6 Press [OK]. NOTE: When
Page 415 and 416:
Management NOTE: Any account ID tha
Page 417 and 418:
Management Restricting the Use of t
Page 419 and 420:
Management Applying Limit of Restri
Page 421 and 422:
Management Use the procedure below
Page 423 and 424:
Management Total Job Accounting/Res
Page 425 and 426:
Management Counting by Paper Size T
Page 427 and 428:
Management Unknown Account ID Jobs
Page 429 and 430:
Appendix • Optional Equipment ...
Page 431 and 432:
Key Counter FAX Kit Expansion Memor
Page 433 and 434:
Job Separator Separate paper accord
Page 435 and 436:
Character Entry Method To enter cha
Page 437 and 438:
Entering Characters Follow the step
Page 439 and 440:
Supported types Supported paper siz
Page 441 and 442:
Multi Purpose Tray Envelope #10 (Co
Page 443 and 444:
• Letterhead • Colored paper
Page 445 and 446:
When printing onto labels, you must
Page 447 and 448:
Specifications NOTE: Specifications
Page 449 and 450:
Description Item 25/25 ppm model 30
Page 451 and 452:
Scanner Item Operating System Syste
Page 453 and 454:
Document Finisher (option) Item Des
Page 455 and 456:
Glossary AppleTalk AppleTalk, which
Page 457 and 458:
NetBEUI (NetBIOS Extended User Inte
Page 459 and 460:
Index Index Numerics 1-sided/2-side
Page 461 and 462:
Index Repeat Copying 8-31 Scan Reso
Page 463 and 464:
Index N Negative Image 4-44 NetBEUI
Page 465 and 466:
Index Quick Setup Screen 3-47 Chang
Page 467 and 468:
E1U
show all

CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Create successful ePaper yourself

Delete template?

Save as template?