CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Management
User Login Administration
User login administration specifies how the user access is administered on this machine. Enter correct login user
name and password for user authentication to log in.
Access are in three levels - User, Administrator, and Machine Administrator. The security levels can be modified
only by the machine administrator.
First User Login Administration
Follow these steps for the first user login administration.
Enable user login administration. (page 11-2)
Add a user.(page 11-4)
Log out.(page 11-4)
The registered user logs in for operations.(page 11-3)
Enabling/Disabling User Login Administration
This enables user login administration. Select one of the following authentication methods:
Item
Local
Authentication
Network
Authentication
Description
User authentication based on user properties on
the local user list stored in the machine.
User authentication based on Authentication
Server. Use a user property stored in
Authentication Server to access the network
authentication login page.
Use the procedure below to enable user login administration.
1 Press the System Menu key.
2 Press [User Login/Job Accounting].
3 If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-4 for
the default login user name and password.
4 Press [Next] of User Login Setting and then
[Change] of User Login.
11-2 OPERATION GUIDE