CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Sending Functions
Background Density Adjustment
Lightens the background of the colored original when it is too dark.
NOTE: You cannot adjust the background density if you selected [Black & White] in Color / Grayscale / Black
and White Selection (see page 5-24).
Use the procedure below to set the background density when sending scanned images.
1 Press the Send key.
2 Place the originals on the platen.
3 Press [Color/Image Quality] and then [Background
Density Adj.].
5
Ready to send.
Place original.
Background Density Adj.
Off
Background
Destination
4 Press [On], and press [1] to [5] (Lighter - Darker) to
adjust the background density.
Place original.
On
Lighter
Darker
1 2 3 4 5
Original
Zoom
Paper
: ---
: 100%
: ---
Preview
Add Shortcut
Cancel
OK
Status 10/10/2008 10:10
5 Press [OK].
6 Specify the destination, and press the Start key to
start sending.
OPERATION GUIDE 5-23