CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Sending Functions
1-sided/2-sided Selection
Select the type and binding of original depending on the original.
The table below lists the binding directions for each original type.
Original Type Binding
1-sided Sheet Original 1-sided —
2-sided Sheet Original
2-sided*
Binding Left/Right,
Binding Top
Open Book Original such
as magazine and book
Book
* Only when the optional document processor is used.
Binding Left,
Binding Right
5
Use the procedure below to select the original type and binding direction when sending scanned originals.
1 Press the Send key.
2 Place the originals on the platen.
3 Press [Original/Sending Data Format] and then [2-
sided/Book Original].
Ready to send.
Place original.
2-sided/Book Original
1-sided
Destination
4 Press [1-sided], [2-sided], or [Book].
Place original.
2-sided
Left
Right
Book
Original
Zoom
Paper
: ---
: 100%
: ---
Preview
Top Edge Top
Original
Orientation
Add Shortcut
Cancel
OK
Status 10/10/2008 10:10
5 If you selected [2-sided] or [Book], you should also
select the binding direction and press [Original
Orientation] to select the direction in which the
original is set on the platen.
6 Press [OK].
7 Specify the destination, and press the Start key to
start sending.
OPERATION GUIDE 5-11