CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Default Setting (System Menu)
E-mail Subject/Body
Set the subject and body automatically entered (default subject and body) when sending the scanned originals
by E-mail.
NOTE: Refer to Send as E-mail on page 3-30.
Use the procedure below to set the default e-mail subject and message body.
1 Press the System Menu key.
2 Press [Common Settings], [ ], [Next] of Function
Defaults, [ ], and then [Change] of E-mail Subject/
Body.
3 Press [Subject] to enter an E-mail subject not more
than 60 characters.
NOTE: Refer to the Character Entry Method on
Appendix-7 for details on entering characters.
4 Press [OK].
5 Press [Body] to enter an E-mail Body not more than
500 characters.
6 Press [OK].
7 Check that the entries are correct and press [OK].
8-26 OPERATION GUIDE