CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Default Setting (System Menu)
System Initialization
Initialize the hard disk mounted on the machine to return to the default mode.
CAUTION: System initialization will erase Custom Document Boxes, data stored in Document Box, addresses
in the Address Book, user property, account information, and settings.
NOTE: This item will not be displayed if the optional Data Security Kit is installed. Refer to the Data Security
Kit (E) OPERATION GUIDE on the bundled CD-ROM about the functions added when the Data Security Kit is
installed and related procedures.
Using Network Print Monitor allows you to backup addresses in the Address Book.
1 Press the System Menu key.
2 Press [ ], [Adjustment/Maintenance] and then
[Execute] of System Initialization.
3 If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-4 for
the default login user name and password.
8
Adjustment/Maintenance
Copy Density Adjustment:
Next
0 0
Print Density:
3
Correcting Black Line:
Off
Display Brightness:
3
This will be formatted.
Are you sure?
This process may take a while.
Yes
Send/Box Density Adjust.:
No
Next
Change
Execute
Change
1/2
4 When the confirmation screen appears, press
[Yes].
Initialization starts.
IMPORTANT: The Formatting... Do not turn off the
main power switch message appears during
initialization. Wait until initialization ends.
Close
Status 10/10/2008 10:10
5 Once the initialization ends, the message Task is
completed. Turn the main power switch off and on.
appears. Turn the main power switch off.
OPERATION GUIDE 8-87