CDC 1725/DCC 2725 CDC 1730/DCC 2730 CDC 1740/DCC 2740 ...

Sending Functions
Zoom
Scans the original by automatically zooming it depending on the sending size.
The table below lists the available options.
Item
Detail
100% No Zoom (to be scanned at actual size)
Auto
Zoomed automatically according to the specified
sending size.
NOTE: When zooming in or out, see Sending Size Selection on page 5-4 when selecting the sending size.
When Custom Size or Size Entry is selected as the original size, the originals are sent at normal size and
zooming cannot be used.
Depending on the combination of original size and sending size, the image is placed at the edge of the paper.
To center the image vertically and horizontally on the page, use the centering setting described in Centering on
page 5-7.
Use the procedure below to enlarge or reduce the original to match the transmission size.
1 Press the Send key.
2 Place the originals on the platen.
3 Select the transmission size.
4 Press [Advanced Setup] and then [Zoom].
Ready to send.
Place original.
Destination
5 Press [100%] or [Auto].
Zoom
Place original.
Enlarge or reduce original when scanning.
[100%]: Scan at actual size.
[Auto]: Enlarge or reduce to match
sending size/storing size.
Original
Zoom
Paper
: ---
: 100%
: ---
100%
Auto
Preview
Add Shortcut
Cancel
OK
Status 10/10/2008 10:10
6 Press [OK].
7 Specify the destination, and press the Start key to
start sending.
5-6 OPERATION GUIDE