ts_125331v120300p

3GPP TS 25.331 version 12.3.0 Release 12
1082
ETSI TS 125 331 V12.3.0 (2014-10)
>>Uplink synchronisation
parameters
>>>Uplink synchronisation step
size
>>>Uplink synchronisation
frequency
>>E-PUCH TS configuration list MP
MD
Default: Uplink
synchronisation
step size 1.
Uplink
synchronisation
frequency 1.
MP Integer (1..8) This parameter
specifies the step
size to be used for
the adjustment of
the uplink
transmission
timing
MP Integer (1..8) This parameter
specifies the
frequency of the
adjustment of the
uplink
transmission
timing
REL-7
REL-7
REL-7
REL-7
>>>TS number MP Integer (1..5) REL-7
>>>Midamble shift and burst MP
REL-7
type
>>>>Midamble Allocation Mode MP Enumerated
(Default
midamble,
UE specific
midamble)
REL-7
>>>>Midamble configuration MP Integer (2, 4,
6, 8, 10, 12,
14, 16)
>>>>Midamble Shift
CV-UE
specific
Integer
(0..15)
>>Minimum allowed code rate MP Integer
(0..63)
>>Maximum allowed code rate MP Integer
(0..63)
>>Maximum number of
MP
Integer
retransmissions for Scheduling
(0..15)
Info
>>Retransmission Timer for
Scheduling Info
MP
Enumerated
(10, 15, 20,
25, 30, 35,
40, 45, 50,
55, 60, 65,
70, 75, 80,
85, 90, 95,
100, 110,
120, 140,
160, 200,
240, 280,
320, 400,
480, 560)
As defined in [30]
Maps 0.055 to 1.0
in steps of 0.015
Maps 0.055 to 1.0
in steps of 0.015
Only used when
no MAC-d PDUs
are included in the
same MAC-e PDU
or MAC-i PDU.
Only used when
no MAC-d PDUs
are included in the
same MAC-e PDU
or MAC-i PDU.
Unit is ms.
Power Offset for Scheduling Info OP Integer (0..6) If present, this IE
should be ignored
for LCR TDD.
Only used when
no MACd PDUs
are included in the
same MACe PDU.
Unit is in dB.
REL-7
REL-7
REL-7
REL-7
REL-7
REL-7
REL-7
ETSI