ts_125331v120300p

3GPP TS 25.331 version 12.3.0 Release 12
557
ETSI TS 125 331 V12.3.0 (2014-10)
5> else:
3> otherwise:
6> store the value of "UARFCN" in the IE "UARFCN" in this occurrence of the IE "Frequency
List" within the variable PRIORITY_INFO_LIST, and in that new entry:
7> store the IEs "Thresh x, high ", "Thresh x, low ", "QqualminFDD" and "QrxlevminFDD".
4> create a new entry in the IE "Priority Info List" and store the value of "priority" in the IE "priority" in
this occurrence of the IE "Priority Info List" within the variable PRIORITY_INFO_LIST, and in that
new entry:
5> set the CHOICE "Radio Access Technology" to "UTRA FDD";
5> if the UE supports multi-band signalling and the UE does not support the frequency band
associated with the IE "UARFCN", but does understand the value of "UARFCN"; and
5> if the UARFCN downlink (Nd) of a frequency band, which has overlap with the band associated
with the IE "UARFCN", is stored in the variable CELL_INFO_LIST:
6> store the UARFCN downlink (Nd) value from the variable CELL_INFO_LIST in the first
occurrence of the IE "Frequency List", and in that occurrence of the IE "Frequency List";
5> else:
7> store the IEs "Thresh x, high ", "Thresh x, low ", "QqualminFDD" and "QrxlevminFDD".
6> store the value of "UARFCN" in the IE "UARFCN" in the first occurrence of the IE
"Frequency List", and in that occurrence of the IE "Frequency List";
7> store the IEs "Thresh x, high ", "Thresh x, low ", "QqualminFDD" and "QrxlevminFDD".
2> for each occurrence of the IE "UTRAN TDD Frequencies":
3> if an entry already exists in the IE "Priority Info List" in the variable PRIORITY_INFO_LIST with the
same priority value as indicated in the IE "priority" and has the CHOICE "Radio Access Technology" set
to "UTRA TDD":
4> create a new entry in the IE "Frequency List" in that occurrence of IE "Priority Info List", and store
the value of "UARFCN" in the IE "UARFCN" in this occurrence of the IE "Frequency List" within
the variable PRIORITY_INFO_LIST, and in that new entry:
3> otherwise:
5> store the IEs "Thresh x, high ", "Thresh x, low " and "QrxlevminTDD".
4> create a new entry in the IE "Priority Info List" and store the value of "priority" in the IE "priority" in
this occurrence of the IE "Priority Info List" within the variable PRIORITY_INFO_LIST, and in that
new entry:
5> set the CHOICE "Radio Access Technology" to "UTRA TDD" and store the value of "UARFCN"
in the IE "UARFCN" in the first occurrence of the IE "Frequency List";
5> store the IEs "Thresh x, high ", "Thresh x, low " and "QrxlevminTDD" in that occurrence of the IE
"Frequency List".
8.6.7.3b
GSM priority info list
If the IE "GSM priority info list" is received in System Information Block Type 19, the UE shall:
1> if the value of the IE "Priority status" in the variable PRIORITY_INFO_LIST equals "dedicated_priority":
2> for each occurrence of the IE "GSM Priority Info":
ETSI