ts_125331v120300p

3GPP TS 25.331 version

3GPP TS 25.331 version 12.3.0 Release 12 1935 ETSI TS 125 331 V12.3.0 (2014-10) Information Element/Group name Need Multi Type and Reference Mapping Info OP Mapping info 10.3.2.5 Semantics description Version REL-11 13.4.57 EUTRA_FREQUENCY_INFO_LIST_FACH NOTE: For FDD only. This variable contains E-UTRA frequency information to be measured under CELL_FACH state, as received in MEASUREMENT CONTROL, and the E-UTRA frequency RACH reporting information as received in System Information Block Type 19. Information Element/Group name Need Multi Type and reference E-UTRA Frequency Info List MP 1 to >EARFCN MP Integer(0 .. 262143) E-UTRA frequency RACH reporting information OP Semantics description EARFCN of the downlink carrier frequency [64]. E-UTRA frequency RACH reporting information 10.3.7.139 Version REL-11 REL-11 REL-11 13.4.58 FALLBACK_R99_PRACH_ENABLED For FDD, in CELL_FACH state or Idle mode, this variable indicates whether R99 PRACH transmission procedure is ongoing to transmit CCCH or DCCH data even when/if READY_FOR_COMMON_EDCH is set to TRUE. See subclause 8.5.76 for actions related to the setting of this variable. Information Element/Group name Need Multi Type and reference Semantics description Fallback R99 PRACH Enabled MP Boolean See subclause 8.5.76 Version REL-11 13.4.59 HS_DSCH_DRX_CELL_FACH_2CYCLE_STATUS This variable indicates whether HS-DSCH DRX operation with second DRX cycle is supported in CELL_FACH. See subclause 8.5.48 for actions related to the setting of this variable. NOTE: FDD only. Information Element/Group name HS-DSCH DRX in CELL_FACH with second DRX cycle status Need Multi Type and reference Semantics description MP Boolean TRUE: HS-DSCH DRX operation in CELL_FACH with second DRX cycle is supported. Set to FALSE when leaving CELL_FACH or when dedicated H-RNTI is cleared. Version REL-11 ETSI

3GPP TS 25.331 version 12.3.0 Release 12 1936 ETSI TS 125 331 V12.3.0 (2014-10) 13.4.60 READY_FOR_COMMON_ERGCH NOTE: For FDD only. In CELL_FACH or CELL_PCH state, this variable indicates whether the UE has been configured for E-RGCH reception on radio links other than the serving E-DCH radio link. See subclause 8.5.75 for actions related to the setting of this variable. Information Element/Group name Need Multi Type and reference Semantics description Ready for common ERGCH MP Boolean See subclause 8.5.75 Version REL-11 13.4.61 READY_FOR_FALLBACK_R99_PRACH For FDD, in CELL_FACH state or Idle mode, this variable indicates whether a NACK on the E-AI in AICH indicates to the UE that the UE should initiate the R99 PRACH procedure to transmit CCCH or DCCH data even when/if READY_FOR_COMMON_EDCH is set to TRUE. See subclause 8.5.77 for actions related to the setting of this variable. Information Element/Group name Need Multi Type and reference Semantics description Ready for Fallback R99 PRACH MP Boolean See subclause 8.5.77 Version REL-11 13.4.62 MIMO_MODE_WITH_FOUR_TRANSMIT_ANTENNAS_PARAMS This variable indicates the values of the parameters for operation in MIMO mode with four transmit antennas. See subclause 8.5.78 for actions related to the setting of this variable. Information Element/Group name Need Multi Type and reference MIMO N_cqi_typeA/M_cqi ratio OP Enumerated( 1/2, 2/3, 3/4, 4/5, 5/6, 6/7, 7/8, 8/9, 9/10, 1/1) MIMO mode with four transmit OP MIMO mode antennas pilot configuration with four transmit antennas pilot configuration 10.3.6.143 Precoding weight set restriction OP Bit string (64) Semantics description Version REL-11 REL-11 REL-11 13.4.63 MIMO_MODE_WITH_FOUR_TRANSMIT_ANTENNAS_STATUS This variable indicates whether the UE is operating in MIMO mode with four transmit antennas. See subclause 8.5.79 for actions related to the setting of this variable. Information Element/Group name MIMO mode with four transmit antennas status Need Multi Type and reference Semantics description MP Boolean TRUE means the UE is operating in MIMO mode with four transmit antennas. Cleared when leaving Version REL-11 ETSI