ts_125331v120300p

3GPP TS 25.331 version 12.3.0 Release 12
835
ETSI TS 125 331 V12.3.0 (2014-10)
3.84_Mcps_tdd_sup
7.68_Mcps_tdd_sup
1.28_Mcps_tdd_sup
gsm_sup
mc_sup
not_iRAT_HoInfo
Condition
Explanation
The IE is mandatory present if an IE "TDD RF
capability" is present with the IE "Chip rate capability"
set to "3.84 Mcps". Otherwise this field is not needed
in the message.
The IE is mandatory present if an IE “TDD RF
capability” is present with the IE “Chip rate capability”
set to “7.68 Mcps”. Otherwise this field is not needed
in the message.
The IE is mandatory present if an IE "TDD RF
capability" is present with the IE "Chip rate capability"
set to "1.28 Mcps". Otherwise this field is not needed
in the message.
The IE is mandatory present if the IE "Inter-RAT UE
radio access capability" indicates support for
GSM900, GSM1800 and/or GSM1900. Otherwise this
field is not needed in the message.
The IE is mandatory present if the IE "Support of
multi-carrier" has the value TRUE. Otherwise this field
is not needed in the message.
The IE is not needed in the INTER RAT HANDOVER
INFO message. Otherwise, it is optionally present.
10.3.3.21a
Measurement capability extension
This IE may be used to replace the measurement capability information provided within IE "Measurement capability".
Information
Element/Group name
Need Multi Type and
reference
FDD measurements MP 1 to
1 to
1 to
>FDD Frequency band CV-fdd2 Enumerat
ed(Band
I, Band II,
Band III,
Band VI,
Band IV,
Band V,
Band VII,
extension
indicator)
Semantics description
The network should
ignore the entry that
includes the ‘extension
indicator’.
The default value is the
same as indicated in
the IE "Frequency
band" included in the IE
" UE radio access
capability extension".
Band numbering is
defined in [21].
The default value is the
same as R99, if the IE
“FDD Frequency band
2” below is not
included. The setting of
the value ‘extension
indicator’ by the UE is
not specified in the
specification.
Version
REL-6
REL-10
REL-5
REL-6
ETSI