ts_125331v120300p

3GPP TS 25.331 version 12.3.0 Release 12
521
ETSI TS 125 331 V12.3.0 (2014-10)
2> if inter-Node B Multiflow operation is not configured:
3> reset the MAC-hs/ehs entity [15].
2> else:
3> reset the MAC-hs/ehs entity related to the serving cell [15].
1> if the IE "MAC-hs reset indicator for Multiflow assisting cells" is included:
2> if inter-Node B Multiflow operation is configured:
3> reset the MAC-hs/ehs entity related to the configured assisting cells [15].
2> else:
3> the UE behaviour is unspecified.
NOTE:
If the MAC header type is changed, either from MAC-hs to MAC-ehs or from MAC-ehs to MAC-hs,
UTRAN should include the IE "MAC-hs reset indicator" in order to ensure a reset of the MAC-hs/ehs
entity in the UE prior to MAC-hs/ehs reconfiguration, otherwise the UE behaviour is unspecified.
8.6.6.28 Downlink DPCH info common for all radio links
If the IE "Downlink DPCH info common for all RL" is included the UE shall:
1> if:
2> the IE "Downlink DPCH info common for all RL" is included in a reconfiguration message; and
2> the UE was in CELL_DCH state upon reception of the message and remains in CELL_DCH state; and
2> the message is not used to perform a hard handover (as specified in subclause 8.6.6.3a) and the IE "Timing
indication" is set to "initialise":
3> the UE behaviour is not specified.
1> if the IE "Downlink DPCH power control information" is included:
2> in the case of FDD:
3> perform actions for the IE "DPC Mode" according to [29].
2> in the case of TDD:
3> perform actions for the IE "TPC Step Size" according to [33].
1> if the IE choice "mode" is set to 'FDD':
2> if the IE "Downlink rate matching restriction information" is included:
3> set the variable INVALID_CONFIGURATION to TRUE.
2> perform actions for the IE "spreading factor";
2> perform actions for the IE "Fixed or Flexible position";
2> perform actions for the IE "TFCI existence";
2> if the IE choice "SF" is set to 256:
3> store the value of the IE "Number of bits for pilot bits".
2> if the IE choice "SF" is set to 128:
3> store the value of the IE "Number of bits for pilot bits".
ETSI