ts_125331v120300p

3GPP TS 25.331 version 12.3.0 Release 12
1131
ETSI TS 125 331 V12.3.0 (2014-10)
10.3.7.10 HCS Cell re-selection information
Information Element/Group
name
Need Multi Type and
reference
Penalty_time MD Integer(0,
10, 20, 30,
40, 50, 60)
Temporary_offsets
CV-Penalty
used
>Temporary_offset1 MP Integer(3, 6,
9, 12, 15, 18,
>Temporary_offset2
CV-FDD-
Quality-
Measure
21, inf)
Integer(2, 3,
4, 6, 8, 10,
12, inf)
Semantics description
Default value is 0 which
means = not used
In seconds
[dB]
[dB]
Penalty used
FDD-Quality-Measure
Condition
Explanation
This IE is not needed if the IE "Penalty time" equals
"not used", else it is mandatory present.
This IE is not needed if the IE "Cell selection and
reselection quality measure" has the value CPICH
RSCP, otherwise the IE is mandatory present. This
conditional presence is implemented in ASN.1 by the
use of a specific RSCP and EcN0 variant of
10.3.7.10.
10.3.7.11 HCS neighbouring cell information
Information Element/Group Need Multi Type and Semantics description
name
reference
HCS_PRIO MD Integer (0..7) Default value = 0
Qhcs MD Qhcs Default value = 0
10.3.7.54a
HCS Cell Re-selection
Information
MP
HCS Cell
Re-selection
Information
10.3.7.10
10.3.7.12 HCS Serving cell information
Information Element/Group Need Multi Type and Semantics description
name
Reference
HCS_PRIO MD Integer (0..7) Default value = 0
Qhcs MD Qhcs Default value = 0
10.3.7.54a
T CRmax MD Enumerated(
not used, 30,
60, 120, 180,
240)
[s]
Default value is not used
N CR
T CrmaxHyst
CV-UE
speed
detector
CV-UE
speed
detector
Integer(1..16
)
Enumerated(
not used, 10,
20, 30, 40,
50, 60, 70)
Default value = 8
[s]
UE Speed detector
Condition
Explanation
This IE is not needed if T Crmax equals 'not used', else it
is mandatory present.
ETSI