ts_125331v120300p

3GPP TS 25.331 version 12.3.0 Release 12
547
ETSI TS 125 331 V12.3.0 (2014-10)
E-UTRA RSRQ Yes Log
The UE shall support 2 different layer 3 filters per measurement type defined in subclause 8.4.0 (i.e. the UE shall be
capable to apply at least 2 different L3 filters to intra-frequency measurement results – see NOTE, at least 2 different L3
filters to inter-frequency measurement results, etc.). If a MEASUREMENT CONTROL message is received that would
require the UE to configure more than 2 different layer 3 filters, the UE may:
1> set the variable CONFIGURATION_INCOMPLETE to TRUE.
NOTE:
Any L3 filter applied to a measurement configured with measurement quantity and/or reporting quantity
that evaluates or reports measurement results for the current used frequency, is counted as one intrafrequency
L3 filter, and is therefore included in the count of used intra-frequency filters.
8.6.7.3 Intra-frequency/Inter-frequency/Inter-RAT cell info list
If the IE "Intra-frequency cell info list" is received in System Information Block Type 11, the UE shall update the
variable CELL_INFO_LIST accordingly and in the following order. The UE shall:
1> if the IE "Intra-frequency cell removal" is received:
2> ignore the IE.
1> if the IE "New Intra-frequency cells" is received, for each cell, and in the same order as the cells appear in the
IE:
2> update the variable CELL_INFO_LIST as follows:
3> if the IE "Intra-frequency cell id" is received:
4> store received cell information at this position in the Intra-frequency cell info list in the variable
CELL_INFO_LIST, possibly overwriting any existing information in this position; and
4> mark the position "occupied".
3> if the IE "Intra-frequency cell id" is not received:
4> store the received cell information at the first vacant position in ascending order in the Intra-frequency
cell info list in the variable CELL_INFO_LIST; and
4> mark the position as "occupied".
If the IE "Intra-frequency cell info list" is received in System Information Block Type 11bis, the UE shall update the
variable CELL_INFO_LIST accordingly and in the following order. The UE shall:
1> for each cell, and in the same order as the cells appear in the IE:
2> update the variable CELL_INFO_LIST as follows:
3> if the IE "Intra-frequency cell id" is received:
4> store received cell information at this position in the Intra-frequency cell info list in the variable
CELL_INFO_LIST, possibly overwriting any existing information in this position; and
4> mark the position "occupied".
3> if the IE "Intra-frequency cell id" is not received:
4> store the received cell information at the first vacant position in ascending order in the Intra-frequency
cell info list in the variable CELL_INFO_LIST; and
4> mark the position as "occupied".
If the IE "Intra-frequency cell info list" is received in System Information Block Type 12, the UE shall update the
variable CELL_INFO_LIST accordingly and in the following order. The UE shall:
ETSI