ts_125331v120300p

3GPP TS 25.331 version 12.3.0 Release 12
331
ETSI TS 125 331 V12.3.0 (2014-10)
15.2bis or System Information Block type 15.2ter or System Information Block type 15.3bis or System
Information Block type 15.6 or System Information Block type 15.7 or System Information Block type 15.8.
8.4.1.7.6 CSG Proximity detection measurement
Upon transition from CELL_FACH to CELL_DCH state, the UE shall:
1> resume CSG Proximity detection type measurement reporting, if configured.
8.4.1.7.7 E-UTRA measurement for CELL_FACH
Upon transition from CELL_FACH to CELL_DCH state, for FDD the UE shall:
1> stop the E-UTRA measurement for CELL_FACH type measurement;
1> delete the measurement of type E-UTRA measurement for CELL_FACH associated with the variable
MEASUREMENT_IDENTITY.
8.4.1.8 Measurements after transition from idle mode to CELL_DCH state
The UE shall obey the following rules for different measurement types after transiting from idle mode to CELL_DCH
state:
8.4.1.8.1 Intra-frequency measurement
Upon transition from idle mode to CELL_DCH state:
1> if intra-frequency measurements applicable to CELL_DCH state are stored in the variable
MEASUREMENT_IDENTITY:
2> if the cell in which the UE transited from idle mode is included in the active set for the CELL_DCH state, the
UE shall:
3> begin measurement reporting.
2> otherwise, the UE shall:
3> not begin the measurement reporting. The measurement shall be restarted when a MEASUREMENT
CONTROL message is received with the corresponding measurement identity.
8.4.1.8.2 Inter-frequency measurement
Upon transition from idle mode to CELL_DCH state, the UE shall:
1> stop monitoring the list of cells assigned in the IE "inter-frequency cell info list" in System Information Block
type 12 (or System Information Block type 11, according to subclause 8.1.1.6.11).
8.4.1.8.3 Inter-RAT measurement
Upon transition from idle mode to CELL_DCH state, the UE shall:
1> stop monitoring the list of cells assigned in the IE "inter-RAT cell info list" in System Information Block type 12
(or System Information Block type 11, according to subclause 8.1.1.6.11);
1> stop monitoring the list of E-UTRA frequencies assigned in the IE "E-UTRA frequency and priority info list" in
System Information Block type 19.
8.4.1.8.4 Traffic volume measurement
Upon transition from idle mode to CELL_DCH state, the UE shall:
1> begin a traffic volume type measurement, assigned in System Information Block type 11 (or System Information
Block type 12, according to subclause 8.1.1.6.11).
ETSI