ts_125331v120300p

3GPP TS 25.331 version 12.3.0 Release 12
85
ETSI TS 125 331 V12.3.0 (2014-10)
1> else
2> clear the variable CELL_RESELECTION_INFO_LCRTDD.
If the variable BCCH_MODIFICATION_ACCESS_PROHIBITION is set to TRUE, the UE shall:
1> set the variable BCCH_MODIFICATION_ACCESS_PROHIBITION to FALSE and allow the access on the cell
according to 8.1.8.2.
8.1.1.6.4 System Information Block type 4
If in connected mode, the UE should store all relevant IEs included in this system information block. The UE shall:
1> if in connected mode:
2> read and act on information sent in this block;
2> read the System Information Block Type 3 for any Access Class Barring information and act on that
information as described in subclause 8.1.1.6.3.
If in idle mode, the UE shall not use the values of the IEs included in this system information block.
8.1.1.6.5 System Information Block type 5 and 5bis
The UE should store all relevant IEs included in this system information block. The UE shall:
1> if the IE "Frequency band indicator" is included and set to a frequency band supported in the UE radio access
capability, the IE "Frequency band indicator 2" is not included, and the IE "Frequency band indicator 3" is not
included; or
1> if the IE "Frequency band indicator" is included and set to "extension indicator", and the IE "Frequency band
indicator 2" is included and set to a frequency band supported in the UE radio access capability, and the IE
"Frequency band indicator 3" is not included; or
1> if the IE "Frequency band indicator" is included and set to "extension indicator", and the IE "Frequency band
indicator 2" is included and set to "extension indicator", and the IE "Frequency band indicator 3" is included and
set to a frequency band supported in the UE radio access capability; or
1> if the IE "Frequency band indicator" is not included in System Information Block type 5, the DL frequency is in
between 2110MHz-2170MHz, and Band I is part of the frequency bands supported by the UE in the UE radio
access capability, or
1> if the IE "Frequency band indicator" is not included in System Information Block type 5, the DL frequency is in
between 1930MHz – 1990MHz, and Band II is part of the frequency bands supported by the UE in the UE radio
access capability, or
1> if the IE "Frequency band indicator" is not included in System Information Block type 5, the DL frequency is in
between 1805MHz-1880MHz, and Band III is part of the frequency bands supported by the UE in the UE radio
access capability, or
1> if the UE supports multi-band signaling and the IE "Multiple Frequency Band indicator list" is included and
contains a frequency band supported in the UE radio access capability:
2> consider the cell to be not barred according to [4];
1> else if the IE "Frequency band indicator" is included and set to a frequency band not supported in the UE radio
access capability, and the IE "Frequency band indicator 2" is not included, and the IE "Frequency band indicator
3" is not included; or
1> if the IE "Frequency band indicator" is included and set to "extension indicator", if the IE "Frequency band
indicator 2" is included and set to a frequency band not supported in the UE radio access capability, and the IE
"Frequency band indicator 3" is not included; or
ETSI