28.11.2014 Views

ts_125331v120300p

ts_125331v120300p

ts_125331v120300p

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

3GPP TS 25.331 version 12.3.0 Release 12<br />

898<br />

ETSI TS 125 331 V12.3.0 (2014-10)<br />

Information Element/Group Need Multi Type and Semantics Version<br />

name<br />

reference description<br />

Default configuration identity MP Integer See NOTE 1<br />

(0..10,<br />

11, REL-4<br />

13, Default<br />

REL-5<br />

configuration ID 2<br />

is not used.<br />

12, 14, 15,<br />

REL-6<br />

16<br />

17, Used only in RRC REL-6<br />

Connection Setup<br />

message.<br />

18..22, See NOTE 1 REL-6<br />

23, Default<br />

REL-9<br />

configuration 23<br />

shall not be used<br />

in this version of<br />

the specification.<br />

24, REL-10<br />

25..31) Reserved for REL-10<br />

future extension<br />

NOTE 1: For TDD, default configuration identities 0, 1, 5, 6, 7 and 22 are only valid from REL-10.<br />

10.3.4.0a Default configuration for CELL_FACH<br />

This information element identifies a default radio parameter configuration for CELL_FACH. The corresponding<br />

default configurations are specified in subclause 13.8.<br />

Information Element/Group Need Multi Type and Semantics Version<br />

name<br />

reference description<br />

Default configuration mode MP Enumerated Indicates whether REL-8<br />

(FDD, TDD) the FDD or TDD<br />

version of the<br />

default<br />

configuration shall<br />

be used<br />

Default configuration identity for MP Integer (0, REL-8<br />

CELL_FACH<br />

1..15) Reserved for<br />

future extension<br />

REL-8<br />

10.3.4.1 Downlink RLC STATUS info<br />

Information Element/Group<br />

name<br />

Need Multi Type and<br />

reference<br />

Semantics<br />

description<br />

Timer_Status_Prohibit OP Integer(10..5 Minimum time in<br />

50 by step of ms between<br />

10,<br />

STATUS repor<strong>ts</strong><br />

550..1000 by<br />

step of 50)<br />

Missing PDU Indicator MP Boolean Value TRUE<br />

indicates that UE<br />

should send a<br />

STATUS report<br />

for each missing<br />

PDU that is<br />

detected<br />

Timer_STATUS_periodic OP Integer(100,<br />

200, 300,<br />

400, 500,<br />

750, 1000,<br />

2000)<br />

Time in<br />

milliseconds<br />

Version<br />

Timer_Reordering CV- Integer(50,1 Time in REL-11<br />

ETSI

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!