ts_125331v120300p

3GPP TS 25.331 version 12.3.0 Release 12
601
ETSI TS 125 331 V12.3.0 (2014-10)
1> set each pattern sequence to the variable DCH_MOPS_IDENTITY according to the IE "Pattern sequence
identifier";
1> update into the variable DCH_MOPS_IDENTITY the configuration information defined by IE group"
Measurement occasion pattern sequence parameters";
1> after the instant in which the message is to be executed without the IE "Activation time", or at the beginning of
the frame indicated by IE “Activation time” as specified in subclause 8.6.3.1:
2> activate the stored pattern sequence corresponding to each IE "Pattern sequence identifier" for which the
"Status Flag" in the variable DCH_MOPS_IDENTITY is set to "activate"; and
2> calculate the concerned CELL_DCH measurement occasion as specified in subclause 8.5.11a, and start the
measurement at the frame calculated CELL_DCH measurement occasion.
8.6.7.27 Frequency index list for enhanced measurement
If the IE "Frequency index list for enhanced measurement" is received by the UE, the UE shall:
1> if prior to the reception of the message, any of the variables "Adjacent frequency info", "Inter-band frequency
info" or "Frequency info list for enhanced measurement" is stored in CELL_INFO_LIST, then for each of the
stored variables:
2> stop all inter-frequency measurement reporting on the cells that belong to the frequency derived from the
stored variable. Each stopped measurement is restarted when a MEASUREMENT CONTROL message is
received with the corresponding measurement identity.
2> clear the stored variable.
1> for each of the IE "Frequency index for enhanced measurement" included in the IE "Frequency index list for
enhanced measurement":
2> extract the frequency information of the element contained in the IE "New inter-frequency cells" that is
indexed by the IE "Frequency index for enhanced measurement";
2> store this frequency information in the variable "Frequency info list for enhanced measurement" in
CELL_INFO_LIST.
If the IE "Frequency index list for enhanced measurement" is received by the UE and the UE does not support enhanced
inter-frequency measurements without compressed mode:
1> The UE behaviour is unspecified.
If any two or more of the IE "Adjacent frequency index", the IE "Inter-band frequency index" or the IE "Frequency
index list for enhanced measurement" are received in the same message:
1> The UE behaviour is unspecified.
8.6.7.28 E-UTRA measurement for CELL_FACH
The IE "E-UTRA measurement for CELL_FACH" is used to control the E-UTRA measurements and reporting in
CELL_FACH state.
For FDD if the IE "E-UTRA measurement for CELL_FACH" is received by the UE in a MEASUREMENT
CONTROL message, UE shall:
1> if the IE "Measurement command" has the value "setup":
2> if any of the IE’s "Report criteria", "Measurement quantity", "E-UTRA frequencies for measurement" or
"Reporting Threshold" is not received, the UE shall:
3> clear all stored measurement control information related associated to this measurement identity in
variable MEASUREMENT_IDENTITY;
3> set the variable CONFIGURATION_INCOMPLETE to TRUE.
ETSI