ts_125331v120300p

3GPP TS 25.331 version 12.3.0 Release 12
575
ETSI TS 125 331 V12.3.0 (2014-10)
1> set the variable CONFIGURATION_INCOMPLETE to TRUE.
In case of 1a or 1e event-triggered reporting:
1> if the IE "Intra-frequency measurement quantity" is set to "pathloss", the UE shall:
2> if detected set cells are indicated as possibly triggering the event within the IEs "Triggering condition 2":
3> set the variable CONFIGURATION_INCOMPLETE to TRUE.
In case of 1a or 1e event-triggered reporting on the secondary uplink frequency:
1> if the IE "Intra-frequency measurement quantity" is set to "pathloss", the UE shall:
2> if detected set cells are indicated as possibly triggering the event within the IEs "Triggering condition 2" in
the IE "Intra-frequency measurement reporting criteria on secondary UL frequency":
3> set the variable CONFIGURATION_INCOMPLETE to TRUE.
8.6.7.17 Quality measurement
If IE "Quality measurement" is received by the UE in a MEASUREMENT CONTROL message, where IE
"measurement command" has the value "setup", but IE "Quality reporting quantity" is not received, the UE shall:
1> clear all stored measurement control information related associated to this measurement identity in variable
MEASUREMENT_IDENTITY;
1> set the variable CONFIGURATION_INCOMPLETE to TRUE.
If Transport Channel BLER reporting is requested in IE "Quality Reporting Quantity", but no transport channels are
explicitly referenced with transport channel identities, the UE shall
1> report BLER for all downlink transport channels, for which Transport Channel BLER is defined and can be
requested [7, 8].
If a transport channel, for which Transport Channel BLER is not defined and can not be requested [7, 8], is referenced
with a transport channel identity in IE "Quality Reporting Quantity" and/or IE "Quality Measurement Reporting
Criteria":
1> the UE behaviour is not specified.
8.6.7.18 UE internal measurement
If IE "UE internal measurement" is received by the UE in a MEASUREMENT CONTROL message, where IE
"measurement command" has the value "setup", but IE "UE internal measurement quantity", IE "UE internal reporting
quantity" or "parameters sent for each UE internal measurement event" (given "CHOICE report criteria" is set to "UE
internal measurement reporting criteria") is not received, the UE shall:
1> clear all stored measurement control information related associated to this measurement identity in variable
MEASUREMENT_IDENTITY;
1> set the variable CONFIGURATION_INCOMPLETE to TRUE.
8.6.7.18a
Void
8.6.7.19 UE positioning
8.6.7.19.0 UE positioning reporting criteria
If IE "UE positioning reporting criteria" is included, the UE shall:
ETSI