28.11.2014 Views

ts_125331v120300p

ts_125331v120300p

ts_125331v120300p

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

3GPP TS 25.331 version 12.3.0 Release 12<br />

719<br />

ETSI TS 125 331 V12.3.0 (2014-10)<br />

Information Element/Group Need Multi Type and Semantics Version<br />

name<br />

reference description<br />

10.3.6.95a<br />

>>>7.68 Mcps TDD REL-7<br />

>>>>Extended Uplink Timing<br />

Advance<br />

OP<br />

REL-7<br />

Extended<br />

Uplink<br />

Timing<br />

Advance<br />

10.3.6.95a<br />

This information<br />

element shall be<br />

present in case of<br />

handover<br />

procedure if timing<br />

advance is<br />

enabled.<br />

Calculated timing<br />

advance value for<br />

the new cell after<br />

handover in a<br />

synchronous TDD<br />

network<br />

>>>1.28 Mcps TDD (No data) REL-4<br />

START OP START<br />

10.3.3.38<br />

Other information elemen<strong>ts</strong><br />

Deferred measurement control<br />

reading<br />

OP<br />

Enumerated<br />

(TRUE)<br />

RB Information elemen<strong>ts</strong><br />

COUNT-C activation time OP Activation<br />

time<br />

10.3.3.1<br />

Uplink counter synchronisation OP<br />

info<br />

>RB with PDCP information list OP 1 to<br />

<br />

>>RB with PDCP information MP RB with<br />

PDCP<br />

information<br />

10.3.4.22<br />

>START list MP 1 to<br />

<br />

>>CN domain identity MP CN domain<br />

identity<br />

10.3.1.1<br />

>>START MP START<br />

10.3.3.38<br />

This information<br />

element is not<br />

needed for<br />

transparent mode<br />

RBs if prior to this<br />

procedure there<br />

exis<strong>ts</strong> one RB<br />

using RLC-TM.<br />

Indicates the UE<br />

has not read<br />

SIB11, SIB11bis<br />

and SIB12, if<br />

available.<br />

Used for radio<br />

bearers mapped<br />

on RLC-TM.<br />

This IE is needed<br />

for each RB<br />

having PDCP in<br />

the case of<br />

lossless SRNS<br />

relocation<br />

START [40]<br />

values for all CN<br />

domains.<br />

START value to<br />

be used in this CN<br />

domain.<br />

REL-7<br />

REL-7<br />

10.2.35 RADIO BEARER SETUP FAILURE<br />

This message is sent by UE, if it does not support the configuration given by UTRAN.<br />

RLC-SAP: AM<br />

Logical channel: DCCH<br />

ETSI

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!