ts_125331v120300p

3GPP TS 25.331 version 12.3.0 Release 12
919
ETSI TS 125 331 V12.3.0 (2014-10)
Timer based no explicit
Max DAT retransmissions
No discard
signalling"
If the modes for discharge of the RLC buffer on the
transmitter side is "Timer based without explicit
signalling"
For unacknowledged mode, only Timer based without
explicit signalling is applicable.
If the modes for discharge of the RLC buffer on the
transmitter side is "Discard after Max_DAT
retransmissions"
If the modes for discharge the of RLC buffer on the
transmitter side is "Reset procedure shall be done
after Max_DAT retransmissions"
10.3.4.26 UM Duplication Avoidance and Reordering info
Information Element/Group
name
Need Multi Type and
reference
Timer_DAR MP Integer(40,
80, 120, 160,
240, 320,
480, 640,
960, 1280,
1920, 2560,
3840, 5120)
Window size DAR MP Integer(4, 8,
16, 32, 40,
48, 56, 64)
Semantics description
Timer (in milliseconds) when
PDUs are released to the
upper layers even though
there are outstanding PDUs
with lower RLC SN values.
Version
REL-6
REL-6
10.3.4.27 UM Out of sequence delivery info
Information Element/Group
name
Timer_OSD
Need Multi Type and
reference
CV-
Integer (40,
notMCCH
80, 120, 160,
240, 320,
480, 640,
960, 1280,
1920, 2560,
3840, 5120)
Window size OSD MP Integer(8,
16, 32,40,
48, 56, 64)
Semantics description
Version
REL-6
REL-6
NOTE:
This timer used to flush the buffer is configured at RRC level and indicated via a local primitive.
notMCCH
Condition
Explanation
If this concerns a logical channel other than MCCH
then this IE is mandatory otherwise it is not needed.
In the latter case Timer_OSD takes the value of the IE
Modification Period as indicated within the IE MCCH
configuration information
10.3.5 Transport CH Information elements
10.3.5.1 Added or Reconfigured DL TrCH information
Information Element/Group
name
Need Multi Type and
reference
Semantics
description
Version
ETSI