28.11.2014 Views

ts_125331v120300p

ts_125331v120300p

ts_125331v120300p

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

3GPP TS 25.331 version 12.3.0 Release 12<br />

1867<br />

ETSI TS 125 331 V12.3.0 (2014-10)<br />

Timer Start Stop At expiry<br />

T313 When the UE detec<strong>ts</strong><br />

consecutive N313 "out of<br />

sync" indication from L1.<br />

For FDD, timer T313 runs<br />

independently for the<br />

downlink frequency<br />

associated with the<br />

primary uplink frequency<br />

and for the downlink<br />

frequency associated<br />

with the secondary uplink<br />

frequency.<br />

When the UE detec<strong>ts</strong><br />

consecutive N315 "in sync"<br />

indication from L1.<br />

T314<br />

T315<br />

T316<br />

T317<br />

T318<br />

T319<br />

T320<br />

When the criteria for<br />

radio link failure are<br />

fulfilled.<br />

The timer is started if<br />

radio bearer(s) that are<br />

associated with T314<br />

exist or if only RRC<br />

connection exis<strong>ts</strong> only to<br />

the CS domain.<br />

When the criteria for<br />

radio link failure are<br />

fulfilled.<br />

The timer is started only<br />

if radio bearer(s) that are<br />

associated with T315<br />

exist or if RRC<br />

connection exis<strong>ts</strong> to PS<br />

domain.<br />

When the UE detec<strong>ts</strong><br />

"out of service area" in<br />

URA_PCH or CELL_PCH<br />

state<br />

When the T316 expires<br />

or when in CELL_FACH<br />

state, the UE detec<strong>ts</strong> "out<br />

of service area".<br />

Transmission of RRC<br />

CONNECTION<br />

REQUEST in case of<br />

connection establishment<br />

for MBMS reception<br />

When entering<br />

CELL_PCH or<br />

URA_PCH.<br />

When receiving the CELL<br />

UPDATE CONFIRM<br />

message with IE “Wait<br />

time” and IE “RRC State<br />

Indicator” set to the value<br />

“CELL_PCH” or<br />

“URA_PCH”.<br />

When the Cell Update<br />

procedure has been completed.<br />

When the Cell Update<br />

procedure has been completed.<br />

When the UE detec<strong>ts</strong> "in service<br />

area".<br />

When the UE detec<strong>ts</strong> "in service<br />

area".<br />

Reception of RRC<br />

CONNECTION SETUP<br />

When leaving CELL_PCH or<br />

URA_PCH state.<br />

When initiating the cell update or<br />

URA update procedure, see<br />

subclause 8.3.1.2.<br />

The criteria for Radio Link failure<br />

is fulfilled.<br />

See subclause 8.3.1.13.<br />

See subclause 8.3.1.14.<br />

Initiate cell update procedure if<br />

in service area is detected.<br />

Otherwise start timer T317,<br />

transit to CELL_FACH state and<br />

initiate cell update procedure<br />

when the UE detec<strong>ts</strong> "in service<br />

area".<br />

T317 never expires.<br />

Enter idle mode<br />

The UE activates star<strong>ts</strong> the DRX<br />

cycle based on “DRX cycle<br />

length coefficient”.<br />

See subclause 8.3.1.16.<br />

T321 See subclause 8.5.49. See subclause 8.5.49. See subclause 8.5.49.<br />

ETSI

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!