ts_125331v120300p

3GPP TS 25.331 version 12.3.0 Release 12
1157
ETSI TS 125 331 V12.3.0 (2014-10)
Information
Element/Group name
>Periodical reporting
information-1b
>Use CIO
Reporting criteria for
secondary UL Frequency
Cells to be excluded in
detected set cells
Need Multi Type and
reference
CV–
Periodical
clause 9
reporting
info-1b
10.3.7.53
aa
CVclause
10
CV-
Clause
11
CV-
Clause
12
1 to <
maxExcl
udedDet
ectedSet
Cells >
Boolean
Intrafrequency
measure
ment
reporting
criteria on
secondar
y UL
frequency
10.3.7.11
9
>Primary CPICH info MP Primary
CPICH
info
10.3.6.60
Semantics description
In case the IE "Intrafrequency
reporting
criteria" is included in
the IE "Inter-frequency
measurement", this IE
is not needed.
TRUE indicates that the
cell individual offset
shall be used for event
evaluation
If present the UE
should exclude
indicated cells in the
event evaluation when
intra-frequency
detected set is enabled.
Version
REL-5
REL-5
REL-9
REL-11
Condition
Clause 0
Clause 1
Clause 2
Clause 3
Clause 4
Clause 5
Clause 6
Clause 7
Clause 8
Clause 9
Clause 10
Clause 11
Clause 12
Explanation
The IE is mandatory present if the IE "Intra-frequency event identity" is set
to "1b" or "1f", otherwise the IE is not needed.
The IE is optional if the IE "Intra-frequency event identity" is set to "1a" or
"1b", otherwise the IE is not needed.
The IE is mandatory present if the IE "Intra-frequency event identity" is set
to "1a" or "1b", otherwise the IE is not needed.
The IE is mandatory present if the IE "Intra-frequency event identity" is set
to , "1e", "1f", "1h" or "1i", otherwise the IE is not needed.
The IE is mandatory present if the IE "Intra-frequency event identity" is set
to "1a", otherwise the IE is not needed.
The IE is mandatory present if the IE "Intra-frequency event identity" is set
to "1c" or 1j , otherwise the IE is not needed.
The IE is mandatory present if the IE "Intra-frequency event identity" is set
to "1a" or "1e", otherwise the IE is not needed.
The IE is mandatory present if the IE "Intra-frequency event identity" is set
to "1a", "1c" or 1j, otherwise the IE is not needed.
The IE is optional if the IE "Intra-frequency event identity" is set to "1e",
"1f", "1h" or "1i". Otherwise the IE is not needed.
The IE is optional if the IE "Intra-frequency event identity" is set to "1b",
otherwise the IE is not needed.
The IE is optional if the IE "Intra-frequency event identity" is set to "1d",
otherwise the IE is not needed.
The IE is not needed when sent in SYSTEM INFORMATION or when IE
"Intra-frequency measurement reporting criteria" is included in the IE "Interfrequency
measurement", otherwise the IE is optional.
The IE is optional if the intra-frequency detected set is configured to trigger
the measurement event, otherwise the IE is not needed.
ETSI