28.11.2014 Views

ts_125331v120300p

ts_125331v120300p

ts_125331v120300p

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

3GPP TS 25.331 version 12.3.0 Release 12<br />

2048<br />

ETSI TS 125 331 V12.3.0 (2014-10)<br />

3> store the radio bearer mapping information in accordance with the default parameters for RB with radio<br />

bearer identity n and configure the transmitting and receiving RLC entities in the UE for that radio bearer<br />

according to Table 13.8.1<br />

1> if a multiplexing option containing the combination "HS-DSCH" for the DL and "RACH" for the UL for a RB<br />

with radio bearer identity n is included in the default configuration:<br />

2> if the radio bearer identity n is listed in explicit or another default configuration in the message received by<br />

the UE:<br />

3> if there is no multiplexing option containing the combination "HS-DSCH" for the DL and "RACH" for<br />

the UL for this radio bearer identity n:<br />

2> else<br />

4> append the radio bearer mapping information in accordance with the default parameters for RB with<br />

radio bearer identity n to the radio bearer mapping information for RB with radio bearer identity n.<br />

3> store the radio bearer mapping information in accordance with the default parameters for RB with radio<br />

bearer identity n and configure the transmitting and receiving RLC entities in the UE for that radio bearer<br />

according to Table 13.8.1<br />

1> if a multiplexing option containing the combination "HS-DSCH" for the DL and "E-DCH" for the UL for a RB<br />

with radio bearer identity n is included in the default configuration:<br />

2> if the radio bearer identity n is listed in explicit or another default configuration in the message received by<br />

the UE:<br />

3> if there is no multiplexing option containing the combination "HS-DSCH" for the DL and "E-DCH" for<br />

the UL for this radio bearer identity n:<br />

2> else<br />

4> append the radio bearer mapping information in accordance with the default parameters for RB with<br />

radio bearer identity n to the radio bearer mapping information for RB with radio bearer identity n.<br />

3> store the radio bearer mapping information in accordance with the default parameters for RB with radio<br />

bearer identity n and configure the transmitting and receiving RLC entities in the UE for that radio bearer<br />

according to Table 13.8.1<br />

ETSI

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!