DSS Player Pro R5 Transcription Module Reference Manual - Sommer

Worktype Property Dialog BoxThis dialog box is used to configure the Worktype ID, Option Items, and the barcode input option.Option ItemThe Worktype ID and Option Items are configured.Worktype ID can be entered using up to 16 desired characters.Up to 10 Option Items can be registered.• To add an Option Item, configure it in the Option Item Property dialog box, which is displayed by clicking[Add]. To enable an Option Item when making a recording on the recorder side, select the checkbox of its Label.• To modify an Option Item, select its Label and click [Modify]. Then, make changes to the Option Item in theOption Item Property dialog box.• To delete an Option Item, select its Label and click [Remove].• To change the order of Option Items, select a Label and use the Up and Down buttons to change the item'sposition.Limitations on Option ItemsWhen creating an audio file, up to 10 Option Items are registered usingthe DS2 recording format, while only three of them are recorded usingthe DSS recording format.Barcode Input OptionThis option configures the input method when using barcodes to input values to the Option Itemsregistered in the Option Item list.• With [Barcode input option] set to "Bulk scanning" in the Worktype Property dialog box, one barcodescanning populates multiple Option Items with data. The start and end digit numbers for scanning can be set inthe Option Item Property dialog box.• With [Barcode input option] set to "Separate scanning", one barcode scanning populates a single OptionItem with data. If multiple Option Items have been registered, separate barcode scannings sequentiallypopulate the Option Items with scanned data.156 / 168