DSS Player Pro R5 Transcription Module Reference Manual - Sommer

ItemStereoMonauralLeftRightDescriptionPlays as stereophonic sound.Plays as monophonic sound.Plays only the left side track of stereophonicsound.Plays only the right side track of stereophonicsound.Channel switching is disabled for monaurally recorded sound.3.6.4 Intro-ScanningThis function sequentially plays only the first five seconds of the files displayed or selected in the ContentList view. When all the files have been intro-scanned, a beeping sound is produced. Files with arecording time of less than five seconds are played through before the next file is played. Files beingplayed back are highlighted in the Content List view.Procedure1. Click on the tool bar on the Main screen.Or click [Intro Scan] on the Play menu.Files displayed in the Content List view will be intro-scanned sequentially from a selected file.If no file is selected, the Intro Scan will begin with the first file in the list.2. Click .Or click [STOP] on the Play menu.The Intro Scan will stop.3.6.5 Inserting Index MarksIndex marks can be inserted or deleted with the Main screen, the Playback Control screen at audiocapturing, or the Transcribe bar at audio capturing.Index marks cannot be inserted into instruction comments.Inserting Index MarksTo insert an index mark, perform the following steps.Procedure1. Select a file in the Content List view.The file will be displayed on the Playback Control bar.2. Move the Position control and click on the tool bar.Or click [Insert Index Mark] on the Play menu.An index mark will be inserted at the Position control location.48 / 168