DSS Player Pro R5 Transcription Module Reference Manual - Sommer

The Modify button allows modifications to an exiting rule and the Remove button candelete an exiting rule.The Rule Settings dialog box will appear.5. In the Rule Settings dialog box, specify the Author ID and the destination foldername, and then click [OK].6. If the folder specified in step 5 is encrypted, click [Set the password fordecryption] to set the decryption password for the folder.7. Click [OK].Clicking [Apply] applies the configured rules to the configuration file.4.5.2 Registering the Author List in the RecorderTo register the Author list, perform the following steps.If required Authors are not registered, register them in the Workflow dialog box.→ [Workflow] - [Author]Procedure1. Connect a supported device to a USB port on the PC.2. Switch on the device.The Main screen will automatically launch.The Device window will display the model of the recorder and file information.While connecting or disconnecting the device while the Main screen is open, deviceinformation will be updated in the Device window.3. Click on the Device Tree view.Or click [Device Setting] on the Device menu.The Device Setting dialog box for the supported model will appear.4. Click [Author List] in the menu tree.The Author List settings will appear in the right frame.79 / 168