User Guide - Mks.com

Viewing Project
Attributes From
a Sandbox
Controlling Sandboxes
The General tab displays the following general sandbox information:
Sandbox Name is the path and name of the sandbox.
Project Name is the path and name of the master project.
Server is the Integrity Server name and port number where the
master project resides.
Revision is the master project’s current revision number.
Last Checkpointed is the last date and time the master project was
checkpointed.
Members is the number of members in the sandbox.
Subsandboxes is the number of subsandboxes in the sandbox.
Sparse setting determines if the selected sandbox is a sparse
sandbox.
Shared setting determines if the selected sandbox is a shared
sandbox.
Line Terminator setting determines the type of ASCII character
Source Integrity recognizes as the end of a line of text: Native (or
automatic, the default setting), LF (or line feed, primarily for
UNIX applications), or CR/LF.
Project Description is a description of the master project.
Working from your sandbox, you can view project attribute information
through the graphical user interface. These are the attributes that apply
across the entire project. To modify project attributes, see “Working With
Project Attribute Information” on page 259.
Attributes can have either of the following formats:
variable
variable=value
To view project attributes in the graphical user interface
1 Do one of the following:
From the Registered Sandboxes view, select the sandbox. Then
click Information.
With a Sandbox view open, select the sandbox. Then select
Sandbox > Properties > Sandbox Information.
The Sandbox Information dialog box is displayed.
281