User Guide - Mks.com

Chapter 12: Advanced Change Package Operations
394
The command runs as follows:
Applying change packages...
22:1
The following warnings have occurred:
-------------------
The change package(s)
21:1 -- main.c(1.2)
are required in order to apply this list of change
packages.
They will be automatically added to the list, since the
backfill option is set to Entire Change Package(cp).
--------------------
*** The following set of operations will be performed:
Project: f:/Aurora_Project/
project.pj[Aurora_Variant_1_0]
Member main.c: update member revision to
Revision 1.3
Are you sure you wish to proceed? [yn](n): y
In this case, Apply CP updates the revision for main.c from 1.1 to 1.3 in
the variant project. Revision 1.2 is automatically added to the member
history in the variant project because it was accepted as part of the backfill
list (CP 21:1).
Apply CP Backfill Options
The Apply CP command operates recursively. To apply a change package,
Source Integrity searches the specified change packages for revision
changes between the current revision and the target revision.
Backfill
Option (GUI)
Entire Change
Packages
Backfill
Option (CLI)
Function
cp Selected by default for the Apply CP
command. Recursively finds all historic
revisions required by the specified change
packages and applies them. It does not ask
the user to confirm the backfill list.
u s e r g u i d e