FONIX® 8000 - Frye Electronics
FONIX® 8000 - Frye Electronics
FONIX® 8000 - Frye Electronics
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Introduction and Setup 21<br />
5. Don’t touch the diaphragm of the microphone!<br />
The diaphragm is located inside the grill of the microphone and is extremely<br />
sensitive. If you need to take the grill off the microphone, please do so with<br />
extreme care, and be especially careful not to touch the diaphragm, as this<br />
can cause permanent damage!<br />
Overall, just be aware that your coupler microphone is a delicate device that<br />
needs to be treated with care and respect. If you do so, you will find it can provide<br />
years of reliable and accurate results.<br />
1.7.3 Locating the serial number and software version<br />
When contacting the factory, it is very useful to have your serial number and<br />
software version handy. This information will help us assist you regarding<br />
repair, upgrade, and technical questions.<br />
The serial number of your <strong>8000</strong> test system can be found on the back of the<br />
main module, just to the right of the power switch. See Figure 1.7.3A. It can<br />
also be found on the Opening screen of the <strong>8000</strong> test system.<br />
Figure 1.7.3A—Serial number location<br />
The software version of your <strong>8000</strong> test system can be found on the Opening<br />
screen. See Figure 1.7.3B.<br />
Press [HELP] to open a help window with more detailed service information.<br />
This data may be requested if you call in with a repair-related question. Press<br />
[HELP] again to close the help window.
Change language