HP ProCurve Wireless Access Point 420 - Hewlett Packard

Figure 5-12. Local MAC Authentication
7. Set the Permission to Allowed.
Access Point Configuration
Configuring Wireless Security
8. Click the [Update] button. The new entry appears in the MAC Authentication
Table.
9. Repeat steps 6 to 8 for each client that is authorized to access the network.
CLI: Configuring MAC Address Authentication
CLI Commands Used in This Section
Command Syntax CLI Reference Page
mac-authentication server [local | remote] page 6-45
address filter default page 6-43
address filter entry page 6-43
address filter delete page 6-44
mac-authentication session-timeout page 6-45
show authentication page 6-46
5-55