HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Command Line Reference<br />
Interface Commands<br />
6-60<br />
Command Usage<br />
When closed system is enabled, the access point will not include its SSID<br />
in beacon messages. Nor will it respond to probe requests from clients<br />
that do not include a fixed SSID.<br />
Example<br />
<strong>HP</strong><strong>420</strong>(if-wireless g)#closed-system<br />
<strong>HP</strong><strong>420</strong>(if-wireless g)#<br />
speed<br />
This command configures the maximum data rate at which a station can<br />
connect to the access point.<br />
Syntax<br />
speed <br />
speed - Maximum access speed allowed for wireless clients.<br />
(Options: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps)<br />
Default Setting<br />
54 Mbps<br />
Command Mode<br />
Interface Configuration (<strong>Wireless</strong>)<br />
Command Usage<br />
The maximum transmission distance is affected by the data rate. The<br />
lower the data rate, the longer the transmission distance.<br />
Example<br />
<strong>HP</strong><strong>420</strong>(if-wireless g)#speed 6<br />
<strong>HP</strong><strong>420</strong>(if-wireless g)#
Change language