HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Command Line Reference<br />
Interface Commands<br />
6-70<br />
transmit-power<br />
This command adjusts the power of the radio signals transmitted from the<br />
access point.<br />
Syntax<br />
transmit-power <br />
signal-strength - Signal strength transmitted from the access point.<br />
(Options: full, half, quarter, eighth, min)<br />
Default Setting<br />
full<br />
Command Mode<br />
Interface Configuration (<strong>Wireless</strong>)<br />
Command Usage<br />
Example<br />
• The min keyword indicates minimum power.<br />
• The longer the transmission distance, the higher the transmission<br />
power required.<br />
<strong>HP</strong><strong>420</strong>(if-wireless g)#transmit-power half<br />
<strong>HP</strong><strong>420</strong>(if-wireless g)#<br />
max-association<br />
This command configures the maximum number of clients that can be associated<br />
with the access point at the same time.<br />
Syntax<br />
max-association <br />
count - Maximum number of associated stations. (Range: 0-64)<br />
Default Setting<br />
64<br />
Command Mode<br />
Interface Configuration (<strong>Wireless</strong>)
Change language