HP ProCurve Wireless Access Point 420 - Hewlett Packard

Access Point Configuration
Configuring SNMP
5-14
■ Trap Destination Community Name: The community string sent with
the notification operation. (Maximum length: 23 characters)
To Enable SNMP and Set Parameters:
1. Select the Configuration tab.
2. Click the [SNMP] button.
3. Select Enable to enable SNMP management.
4. Type text strings to replace the default community names for read-only
and read/write access. (Recommended for security.)
5. (Optional) If you want to send SNMP traps to a management station, type
the IP address in the Trap Destination IP Address field and specify one of
the configured community names in the Trap Destination Community Name
field.
6. (Optional) Type a text string to identify the location of the access point in
the Location text field.
7. (Optional) Type a text string or name to identify a system administration
contact in the Contact text field.
8. Click the [Apply Changes] button.