HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Command Line Reference<br />
Flash/File Commands<br />
6-30<br />
show snmp<br />
This command displays the SNMP configuration settings.<br />
Command Mode<br />
Exec<br />
Example<br />
<strong>HP</strong><strong>420</strong>#show snmp<br />
SNMP Information<br />
============================================<br />
Service State : Enable<br />
Community (ro) : *****<br />
Community (rw) : *****<br />
Location : WC-19<br />
Contact : Paul<br />
Traps : Enabled<br />
Host Name/IP : 10.1.19.23<br />
Trap Community : *****<br />
=============================================<br />
<strong>HP</strong><strong>420</strong>#<br />
Flash/File Commands<br />
These commands are used to manage the system code or configuration files.<br />
Command Function Mode Page<br />
bootfile Specifies the file or image used to start up the system Exec 6-31<br />
copy Copies a code image or configuration between flash Exec 6-31<br />
memory and a FTP/TFTP server<br />
delete Deletes a file or code image Exec 6-33<br />
dir Displays a list of files in flash memory Exec 6-33
Change language