HP ProCurve Wireless Access Point 420 - Hewlett Packard

More documents

Recommendations

Info

Command Line Reference RADIUS Client 6-38 show radius This command displays the current settings for the RADIUS server. Default Setting None Command Mode Exec Example HP420#show radius Radius Server Information ======================================== IP : 192.168.1.25 Port : 181 Key : ***** Retransmit : 5 Timeout : 10 ======================================== Radius Secondary Server Information ======================================== IP : 0.0.0.0 Port : 1812 Key : ***** Retransmit : 3 Timeout : 5 ======================================== HP420#
802.1x Port Authentication Command Line Reference 802.1x Port Authentication The access point supports IEEE 802.1x (802.1x) access control for wireless clients. This control feature prevents unauthorized access to the network by requiring an 802.1x client application to submit user credentials for authentication. Client authentication is then verified by a RADIUS server using EAP (Extensible Authentication Protocol) before the access point grants client access to the network. The 802.1x EAP packets are also used to pass dynamic unicast session keys and static broadcast keys to wireless clients. Command Function Mode Page 802.1x Configures 802.1x as disabled, supported, or required GC 6-40 802.1x broadcast- Sets the interval at which the primary broadcast keys GC 6-41 key-refresh-rate are refreshed for stations using 802.1x dynamic keying 802.1x session- Sets the interval at which unicast session keys are GC 6-41 key-refresh-rate refreshed for associated stations using dynamic keying 802.1x session- Sets the timeout after which a connected client must GC 6-42 timeout be re-authenticated address filter Sets filtering to allow or deny listed addresses GC 6-43 default address filter entry Enters a MAC address in the filter table GC 6-43 address filter Removes a MAC address from the filter table GC 6-44 delete mac- Sets address filtering to be performed with local or GC 6-45 authentication remote options server mac- Sets the interval at which associated clients will be re- GC 6-45 authentication authenticated with the RADIUS server authentication session-timeout database show Shows all 802.1x authentication settings, as well as the Exec 6-46 authentication address filter table 6-39
Page 1 and 2:
HP ProCurve Wireless Access Point 4
Page 3 and 4:
Contents 1 Getting Started Contents
Page 5 and 6:
Modifying System Management Access
Page 7 and 8:
sntp-server date-time . . . . . . .
Page 9:
shutdown . . . . . . . . . . . . .
Page 12 and 13:
Getting Started Introduction 1-2 In
Page 14 and 15:
Getting Started Related Publication
Page 16 and 17:
Getting Started Sources for More In
Page 18 and 19:
Getting Started Need Only a Quick S
Page 20 and 21:
Selecting a Management Interface Ov
Page 22 and 23:
Selecting a Management Interface Ad
Page 24 and 25:
Using the Command Line Interface (C
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Using the HP Web Browser Interface
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Access Point Configuration Overview
Page 60 and 61:
Access Point Configuration Modifyin
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Access Point Configuration Configur
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Access Point Configuration Enabling
Page 76 and 77:
Access Point Configuration Enabling
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Access Point Configuration Setting
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111: Access Point Configuration Configur
Page 124 and 125: Command Line Reference Overview 6-2
Page 126 and 127: Command Line Reference General Comm
Page 128 and 129: Command Line Reference General Comm
Page 130 and 131: Command Line Reference System Manag
Page 148 and 149: Command Line Reference SNMP Command
Page 150 and 151: Command Line Reference SNMP Command
Page 152 and 153: Command Line Reference Flash/File C
Page 154 and 155: Command Line Reference Flash/File C
Page 156 and 157: Command Line Reference RADIUS Clien
Page 158 and 159: Command Line Reference RADIUS Clien
Page 162 and 163: Command Line Reference 802.1x Port
Page 170 and 171: Command Line Reference Filtering Co
Page 172 and 173: Command Line Reference Filtering Co
Page 174 and 175: Command Line Reference Interface Co
Page 200 and 201: Command Line Reference VLAN Command
Page 202 and 203: Command Line Reference VLAN Command
Page 204 and 205: File Transfers Overview A-2 Overvie
Page 206 and 207: File Transfers Downloading Access P
Page 208 and 209: File Transfers Downloading Access P
Page 210 and 211:
File Transfers Transferring Configu
Page 212 and 213:
File Transfers Transferring Configu
Page 214 and 215:
P password … 4-7, 4-8 administrat
show all

HP ProCurve Wireless Access Point 420 - Hewlett Packard

Create successful ePaper yourself

Delete template?

Save as template?