HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
description<br />
Command Line Reference<br />
Interface Commands<br />
This command adds a description to the wireless interface. Use the no form<br />
to remove the description. The wireless interface description is displayed<br />
when using the show interface wireless g command from the Exec level.<br />
Syntax<br />
description <br />
no description<br />
string - Comment or a description for this interface.<br />
(Range: 1-80 characters)<br />
Default Setting<br />
Enterprise 802.11g <strong>Access</strong> <strong>Point</strong><br />
Command Mode<br />
Interface Configuration (<strong>Wireless</strong>)<br />
Example<br />
<strong>HP</strong><strong>420</strong>(config)#interface wireless g<br />
<strong>HP</strong><strong>420</strong>(if-wireless g)#description RD-AP#3<br />
<strong>HP</strong><strong>420</strong>(if-wireless g)#<br />
closed-system<br />
This command closes access to clients without a pre-configured SSID. Use the<br />
no form to disable this feature.<br />
Syntax<br />
closed-system<br />
no closed-system<br />
Default Setting<br />
Disabled<br />
Command Mode<br />
Interface Configuration (<strong>Wireless</strong>)<br />
6-59
Change language