HP ProCurve Wireless Access Point 420 - Hewlett Packard

Command Line Reference
General Commands
6-6
reset
This command restarts the system or restores the factory default settings.
Syntax
reset
• board - Reboots the system.
• configuration - Resets the configuration settings to the factory
defaults, and then reboots the system.
Default Setting
None
Command Mode
Exec
Command Usage
When the system is restarted, it will always run the Power-On Self-Test.
Example
This example shows how to reset the system:
HP420#reset board
Reboot system now? : y
show history
This command shows the contents of the command history buffer.
Default Setting
None
Command Mode
Exec
Command Usage
• The history buffer size is fixed at 10 commands.
• Use the up or down arrow keys to scroll through the commands in
the history buffer.