HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
File Transfers<br />
Downloading <strong>Access</strong> <strong>Point</strong> Software<br />
A-6<br />
CLI: TFTP/FTP Software Download to the <strong>Access</strong> <strong>Point</strong><br />
CLI Commands Used in This Section<br />
Command Syntax CLI Reference Page<br />
copy file page 6-31<br />
dir page 6-33<br />
reset page 6-6<br />
The following example shows how to download new code to the access point<br />
using a TFTP server. After downloading the software file, you must reboot the<br />
access point.<br />
<strong>HP</strong><strong>420</strong>#copy tftp file<br />
1. Application image<br />
2. Config file<br />
3. Boot block image<br />
Select the type of download: [1]:1<br />
TFTP Source file name:hp<strong>420</strong>-2022.bin<br />
TFTP Server IP:10.1.0.9<br />
<strong>HP</strong><strong>420</strong>#dir<br />
File Name Type File Size<br />
-------------------------- ---- -----------<br />
dflt-img.bin 2 1325119<br />
hp<strong>420</strong>-2022.bin 2 1325119<br />
syscfg 5 17004<br />
syscfg_bak 5 17004<br />
262144 byte(s) available<br />
<strong>HP</strong><strong>420</strong>#reset board<br />
Reboot system now? : y<br />
Using the Web Interface To Download Software From<br />
the Local Computer<br />
This procedure assumes that:<br />
■ A software file for the access point has been stored on the local computer.<br />
(The access point software file is typically available from the <strong>HP</strong> <strong>ProCurve</strong><br />
website at http://www.hp.com/go/hpprocurve.)
Change language