HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Command Line Reference<br />
RADIUS Client<br />
Command Function Mode Page<br />
radius-server<br />
retransmit<br />
radius-server<br />
timeout<br />
Sets the number of retries GC 6-36<br />
Sets the interval between sending authentication<br />
requests<br />
GC 6-37<br />
show radius Shows the current RADIUS settings Exec 6-38<br />
radius-server address<br />
This command specifies the primary and secondary RADIUS servers.<br />
Syntax<br />
radius-server address [secondary] <br />
• secondary - Secondary server.<br />
• host_ip_address - IP address of server.<br />
• host_name - Host name of server. (Range: 1-20 characters)<br />
Default Setting<br />
None<br />
Command Mode<br />
Global Configuration<br />
Example<br />
<strong>HP</strong><strong>420</strong>(config)#radius-server address 192.168.1.25<br />
<strong>HP</strong><strong>420</strong>(config)#<br />
radius-server port<br />
This command sets the RADIUS server network port.<br />
Syntax<br />
radius-server [secondary] port <br />
• secondary - Secondary server.<br />
• port_number - RADIUS server UDP port used for authentication<br />
messages. (Range: 1024-65535)<br />
6-35
Change language