HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
logging on<br />
Command Line Reference<br />
System Management Commands<br />
This command controls logging of error messages, i.e., sending debug or error<br />
messages to memory. The no form disables the logging process.<br />
Syntax<br />
logging on<br />
no logging<br />
Default Setting<br />
None<br />
Command Mode<br />
Global Configuration<br />
Command Usage<br />
The logging process controls error messages saved to memory. You can<br />
use the logging level command to control the type of error messages that<br />
are stored in memory.<br />
Example<br />
<strong>HP</strong><strong>420</strong>(config)#logging on<br />
<strong>HP</strong><strong>420</strong>(config)#<br />
logging host<br />
This command specifies a Syslog server host that will receive logging<br />
messages. Use the no form to remove Syslog server host.<br />
Syntax<br />
logging host <br />
no logging host<br />
• host-name - The name of a Syslog server. (Range: 1-20 characters)<br />
• host-ip-address - The IP address of a Syslog server.<br />
Default Setting<br />
None<br />
Command Mode<br />
Global Configuration<br />
6-15
Change language