HP ProCurve Wireless Access Point 420 - Hewlett Packard

General Commands
Command Line Reference
General Commands
Command Function Mode Page
configure Activates global configuration mode Exec 6-3
end Returns to the previous configuration mode GC, IC 6-4
exit Returns to the Exec mode, or exits the CLI any 6-4
ping Sends ICMP echo request packets to another node Exec 6-5
on the network
reset Restarts the system Exec 6-6
show history Shows the command history buffer Exec 6-6
show line Shows the configuration settings for the console port Exec 6-7
configure
This command activates Global Configuration mode. You must enter this
mode to modify most of the settings on the access point. You must also enter
Global Configuration mode prior to enabling the context modes for Interface
Configuration. See “Using the CLI” on page 3-2.
Default Setting
None
Command Mode
Exec
Example
HP420#configure
HP420(config)#
Related Commands
end (page 6-4)
6-3