HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Example<br />
<strong>HP</strong><strong>420</strong>(config)#username bob<br />
<strong>HP</strong><strong>420</strong>(config)#<br />
password<br />
Command Line Reference<br />
System Management Commands<br />
After initially logging onto the system, you should set the password.<br />
Remember to record it in a safe place. Use the no form to reset the default<br />
password.<br />
Syntax<br />
password <br />
no password<br />
password - Password for management access.<br />
(Length: 3-16 characters, case sensitive)<br />
Default Setting<br />
None<br />
Command Mode<br />
Global Configuration<br />
Example<br />
<strong>HP</strong><strong>420</strong>(config)#password hp<strong>420</strong>ap<br />
<strong>HP</strong><strong>420</strong>(config)#<br />
ip http port<br />
This command specifies the TCP port number used by the Web browser<br />
interface. Use the no form to use the default port.<br />
Syntax<br />
ip http port <br />
no ip http port<br />
port-number - The TCP port to be used by the browser interface.<br />
(Range: 1024-65535)<br />
Default Setting<br />
80<br />
6-13
Change language