HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Command Syntax CLI Reference Page<br />
dtim-period <br />
fragmentation-length <br />
rts-threshold <br />
transmit-power <br />
max-association <br />
[no] shutdown<br />
show interface wireless g<br />
page 6-63<br />
page 6-64<br />
page 6-65<br />
page 6-70<br />
page 6-70<br />
page 6-75<br />
page 6-75<br />
<strong>Access</strong> <strong>Point</strong> Configuration<br />
Modifying Radio Settings<br />
Using the CLI to Set the Country Code. The correct code must be set for<br />
the country in which you operate the access point so that it uses the correct<br />
authorized radio channels for wireless network devices.<br />
Not e The J8130A comes with the country pre-configured; the J8131A does not. The<br />
radio is disabled if the Country Code is not set. Once the Country Code is set,<br />
the radio is enabled.<br />
The following example shows how to set the Country Code for the access<br />
point to United Kingdom (GB). You can display the available country codes<br />
by using the country ? command. A full list of the access point’s Country Codes<br />
is provided in Table 6-1 on page 6-10.<br />
5-41
Change language