HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Command Line Reference<br />
System Management Commands<br />
6-24<br />
Example<br />
<strong>HP</strong><strong>420</strong>#show system<br />
System Information<br />
============================================================<br />
Serial Number : 0000000001<br />
System Up time : 0 days, 0 hours, 1 minutes, 3 seconds<br />
System Name : Enterprise AP<br />
System Location :<br />
System Contact : Contact<br />
System Country Code : NA - North America<br />
MAC Address : 00-30-F1-81-83-12<br />
IP Address : 10.1.0.1<br />
Subnet Mask : 255.255.255.0<br />
Default Gateway : 0.0.0.0<br />
VLAN State : DISABLED<br />
Native VLAN ID : 1<br />
IAPP State : ENABLED<br />
DHCP Client : DISABLED<br />
HTTP Server : ENABLED<br />
HTTP Server Port : 80<br />
Slot Status : Dual band(b/g)<br />
Software Version : v2.0.22<br />
===========================================================<br />
<strong>HP</strong><strong>420</strong>#<br />
show version<br />
This command displays the software version for the system.<br />
Default Setting<br />
None<br />
Command Mode<br />
Exec<br />
Example<br />
<strong>HP</strong><strong>420</strong>#show version<br />
Version v2.0.22<br />
<strong>HP</strong><strong>420</strong>#
Change language