HP ProCurve Wireless Access Point 420 - Hewlett Packard

Access Point Configuration
Modifying Radio Settings
Using the CLI to Configure Radio Settings. The following example
shows how to enable and disable the radio, as well as configure other radio
parameters.
HP420(config)#interface wireless g
Enter Wireless configuration commands, one per line.
HP420(if-wireless g)#shutdown
HP420(if-wireless g)#speed 24
HP420(if-wireless g)#channel 9
HP420(if-wireless g)#beacon-interval 60
HP420(if-wireless g)#dtim-period 8
HP420(if-wireless g)#fragmentation-length 1024
HP420(if-wireless g)#rts-threshold 2000
HP420(if-wireless g)#transmit-power half
HP420(if-wireless g)#max-association 64
HP420(if-wireless g)#no shutdown
5-43