HP ProCurve Wireless Access Point 420 - Hewlett Packard

File Transfers
Transferring Configuration Files
Figure A-2. Local Software Upgrade
A-8
Transferring Configuration Files
CLI Commands Used in This Section
Command Syntax CLI Reference Page
copy config page 6-31
copy file page 6-31
dir page 6-33
reset page 6-6
Using the CLI commands described in this section, you can copy access point
configuration files to and from an FTP or TFTP server. Transferring configuration
files is not available using the web interface.
When you copy the access point configuration file to an FTP/TFTP server, that
file can later be downloaded to the access point to restore the system configuration.
The success of the file transfer depends on the accessibility of the
FTP/TFTP server and the quality of the network connection.