HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Command Line Reference<br />
System Management Commands<br />
6-18<br />
Command Usage<br />
The command specifies the facility type tag sent in Syslog messages. (See<br />
RFC 3164.) This type has no effect on the kind of messages reported by<br />
the access point. However, it may be used by the Syslog server to sort<br />
messages or to store messages in the corresponding database.<br />
Example<br />
<strong>HP</strong><strong>420</strong>(config)#logging facility 19<br />
<strong>HP</strong><strong>420</strong>(config)#<br />
show logging<br />
This command displays the logging configuration.<br />
Syntax<br />
show logging<br />
Command Mode<br />
Exec<br />
Example<br />
<strong>HP</strong><strong>420</strong>#show logging<br />
Logging Information<br />
============================================<br />
Syslog State : Disabled<br />
Logging Host State : Enabled<br />
Logging Console State : Disabled<br />
Server Domain name/IP : none<br />
Logging Level : Error<br />
Logging Facility Type : 16<br />
=============================================<br />
<strong>HP</strong><strong>420</strong>#
Change language