HP ProCurve Wireless Access Point 420 - Hewlett Packard

More documents

Recommendations

Info

Access Point Configuration Configuring Wireless Security 5-60 The following example shows how to configure 802.1x authentication to be required by all clients, as well as setting broadcast and session key refresh rates and a re-authentication timeout. HP420(config)#interface wireless g HP420(if-wireless g)#authentication open HP420(if-wireless g)#end HP420(config)#802.1x required HP420(config)#802.1x broadcast-key-refresh-rate 5 HP420(config)#802.1x session-key-refresh-rate 5 HP420(config)#802.1x session-timeout 600 HP420(config)# The following example shows how to display the current 802.1x configuration on the access point from the Exec level. HP420#show authentication Authentication Information ========================================================= MAC Authentication Server : LOCAL MAC Auth Session Timeout Value : 0 secs 802.1x : REQUIRED Broadcast Key Refresh Rate : 5 min Session Key Refresh Rate : 5 min 802.1x Session Timeout Value : 600 secs Address Filtering : DENIED System Default : DENY addresses not found in filter table. Filter Table MAC Address Status ----------------- ---------- 00-70-23-7a-1c-bb ALLOWED 00-70-51-49-d3-26 ALLOWED ========================================================= HP420#
Web: Setting up WEP Shared-Keys Access Point Configuration Configuring Wireless Security Setting up shared keys enables the basic IEEE 802.11 Wired Equivalent Privacy (WEP) on the access point to prevent unauthorized access to the network. If you choose to use WEP shared keys instead of an open system, be sure to define at least one static WEP key for user authentication and data encryption. Also, be sure that the WEP shared keys are the same for each client in the wireless network. Not e WEP has been found to be seriously flawed and cannot be recommended for a high level of network security. For more robust wireless security, the access point provides Wi-Fi Protected Access (WPA) for improved data encryption and user authentication. The Shared Key Setup window on the Security tab enables WEP shared keys to be configured for the access point. The web interface enables you to modify these parameters: ■ Authentication Type Setup: Sets the access point to communicate with clients using pre-configured static shared keys or as an open system that accepts network access attempts from any client. • Open System: Select this option if you plan to use WPA or 802.1x as a security mechanism. If you don’t set up any other security mechanism on the access point, the network has no protection and is open to all users. • Shared Key: Sets the access point to use WEP shared keys. If this option is selected, you must configure at least one key on the access point and all clients. ■ Wired Equivalent Privacy (WEP) Setup: Enable or disable the access point to use WEP shared keys. If this option is selected, you must configure at least one key on the access point and all clients. ■ Shared Key Setup: Select 64 Bit, 128 Bit, or 152 Bit. Note that the same size of encryption key must be supported on all wireless clients. ■ Key Type: Select the preferred method of entering WEP encryption keys on the access point and enter up to four keys: • Hexadecimal: Enter keys as 10 hexadecimal digits (0 to 9 and A to F) for 64 bit keys, 26 hexadecimal digits for 128 bit keys, or 32 hexadecimal digits for 152 bit keys. 5-61
Page 1 and 2:
HP ProCurve Wireless Access Point 4
Page 3 and 4:
Contents 1 Getting Started Contents
Page 5 and 6:
Modifying System Management Access
Page 7 and 8:
sntp-server date-time . . . . . . .
Page 9:
shutdown . . . . . . . . . . . . .
Page 12 and 13:
Getting Started Introduction 1-2 In
Page 14 and 15:
Getting Started Related Publication
Page 16 and 17:
Getting Started Sources for More In
Page 18 and 19:
Getting Started Need Only a Quick S
Page 20 and 21:
Selecting a Management Interface Ov
Page 22 and 23:
Selecting a Management Interface Ad
Page 24 and 25:
Using the Command Line Interface (C
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Using the HP Web Browser Interface
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Access Point Configuration Overview
Page 60 and 61:
Access Point Configuration Modifyin
Page 62 and 63:
Page 64 and 65:
Page 66 and 67: Access Point Configuration Configur
Page 74 and 75: Access Point Configuration Enabling
Page 76 and 77: Access Point Configuration Enabling
Page 88 and 89: Access Point Configuration Setting
Page 94 and 95: Access Point Configuration Modifyin
Page 124 and 125: Command Line Reference Overview 6-2
Page 126 and 127: Command Line Reference General Comm
Page 128 and 129: Command Line Reference General Comm
Page 130 and 131: Command Line Reference System Manag
Page 148 and 149: Command Line Reference SNMP Command
Page 150 and 151: Command Line Reference SNMP Command
Page 152 and 153: Command Line Reference Flash/File C
Page 154 and 155: Command Line Reference Flash/File C
Page 156 and 157: Command Line Reference RADIUS Clien
Page 162 and 163: Command Line Reference 802.1x Port
Page 164 and 165: Command Line Reference 802.1x Port
Page 166 and 167:
Command Line Reference 802.1x Port
Page 168 and 169:
Command Line Reference 802.1x Port
Page 170 and 171:
Command Line Reference Filtering Co
Page 172 and 173:
Command Line Reference Filtering Co
Page 174 and 175:
Command Line Reference Interface Co
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Command Line Reference VLAN Command
Page 202 and 203:
Command Line Reference VLAN Command
Page 204 and 205:
File Transfers Overview A-2 Overvie
Page 206 and 207:
File Transfers Downloading Access P
Page 208 and 209:
File Transfers Downloading Access P
Page 210 and 211:
File Transfers Transferring Configu
Page 212 and 213:
File Transfers Transferring Configu
Page 214 and 215:
P password … 4-7, 4-8 administrat
show all

HP ProCurve Wireless Access Point 420 - Hewlett Packard

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?