HP ProCurve Wireless Access Point 420 - Hewlett Packard

Command Line Reference
System Management Commands
6-16
Example
HP420(config)#logging host 10.1.0.3
HP420(config)#
logging console
This command initiates logging of error messages to the console. Use the no
form to disable logging to the console.
Syntax
logging console
no logging console
Default Setting
Disabled
Command Mode
Global Configuration
Example
HP420(config)#logging console
HP420(config)#
logging level
This command sets the minimum severity level for event logging.
Syntax
logging level
Default Setting
Error
Command Mode
Global Configuration